Cart 0

Drain cleaner for 2" to 4" lines - Easy Rooter Junior

Product Code: 
  • $2,580.00

The Easy Rooter Junior drives up to 100 feet of 1/2″ Flexicore® cable to clear 2″, 3″ and most 4″ drain lines. Comes with Flexicore Cable and EJCS Cutter Set.

A Quick-Grip™ chuck secures the cable during operation. With a just a quarter turn, the chuck tightens firmly on the cable to secure it while the Easy Rooter Junior drives the cable into the line. Then, can be released just as quickly to pull more cable from the drum. It’s faster and easier to use than a thumb screw.

The reinforced powder coated steel frame is built to take heavy duty use and abuse. A special “roll bar” protects the motor when loading the machine into car trunk. The machine rolls easily to and from the job on 10″ ball bearing wheels. And a passive wheel brake locks the machine in position on the job.

A folding handle quickly locks in place, making it much easier to wheel the Easy Rooter Junior to the job, without sacrificing the compact size needed for easy loading in a car trunk.

Power is supplied by a 1/3 hp capacitor motor with thermal overload protection. A momentary contact reverse switch protects the cable by preventing the operator from running the machine in reverse for more than a few seconds at a time.

Standard safety features include an air actuated foot pedal, ground fault circuit interrupter, safety slip clutch, and instructional video in English, French, and Spanish.


  • A large capacity machine for 2″ to 4″ lines.
  • Cage holds 100 ft. of 1/2″ Flexicore® cable.
  • Open cage lets you see cable condition after each rental.
  • Patented Quick-Grip™ chuck tightens firmly on cable with just a quarter turn.
  • Pneumatic foot pedal and ground fault interrupter for safety.
  • Safety slip clutch protects cable and operator.
  • Powder coated steel frame with folding handle and ten inch heavy duty wheels.
  • 1/3 hp motor with thermal overload protection.
  • Momentary contact reverse switch.
  • Made in U.S.A.

Quick-Grip™ Chuck

A Quick-Grip™ chuck secures the cable during operation. With a just a quarter turn, the chuck tightens firmly on the cable. It’s faster and easier to use than a thumb screw.

Folding Handle

Handle folds down for more compact storage and to take less space in car trunk.

Reverse Switch

A momentary contact reverse switch protects the cable by preventing the operator from running the machine in reverse for more than a few seconds at a time.

Safety Slip Clutch

Reduces chance of cable tangling or injury to the operator. Allows V-belt to slip through pulley until torque is reduced.


Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequaled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.

CableFlexicore® Patent Nos.
2,244,735 and 2,849,870 


Snake-Oil Classic

A great way to extend the life of drain cleaning tools & equipment

Snake-Oil Classic™ preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give equipment a fresh, clean smell. Available in quarts or gallons.

Snake-Oil Classic SDS – Material Safety Data Sheet

More Information


General Pipe Cleaners’ Quick-Fix™ let’s you quickly repair broken drain snakes in the field. The unique Quick-Fix let’s you continue working and finish the job without having to go back to your shop to repair or replace a broken cable. The Quick-Fix is available in 1/2”, 9/16”, 5/8”, and 3/4” sizes with female or male connectors.

The specially designed spring with a pre-welded female connecter is easy to attach in the field. Prepare your broken snake by cutting off the damaged or kinked end of the cable with bolt cutters or a hack saw. Then simply thread the Quick-Fix over the broken snake. No welder is required! All you need are vice-grips or a pair of pliers. Once it’s on, the Quick-Fix holds on so tightly that it simply cannot be removed, even if you wanted to.

More Information


Rip through tough stoppages with the unique ClogChopper® multi-function cutting tools. Six self-sharpening blades dig into encrusted debris and root masses, easily grinding up stoppages, scale, and crystallized urine, without risking pipe damage.

The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls. It’s excellent for clearing stacks, downspouts, mains, as well as for drain lining jobs.

More Information


AH Arrow Head  Starting Drill (Gets water flowing)

1-1/2 UC 1-1/2" U-Cutter  For cutting and scraping

2UC 2" U Cutter  For cutting and scraping

RTR-1 Small Retrieving Tool  For removing loose objects and broken cables






Weight: 65 lbs. without cable.

Capacity: 100 ft. of 1/2″ Flexicore Wire Rope Center Cable.

Motor: 1/3 hp heavy duty, capacitor start, thermal overload protection, Forward/Off/Momentary Contact Reverse Switch.

Safety Slip Clutch: Protects cable and operator.

Foot Pedal: Uses air pressure, so there’s no electrical contact between pedal and motor.

Flexicore Cable: Heavy gauge wire coiled tightly around 49 strand aircraft-type wire rope and heat treated.

Power Cord: 20 ft., 3 wire; equipped with ground fault circuit interrupter.

Wheels: 10″ Semi-pneumatic tires, with roller bearings.

Cutter Set: Arrow Head, 1 1/2″ U-Cutter, 2″ U-Cutter and Retrieving Tool. Others available.

Leather Gloves: With reinforced palm for hand protection.

Weight: 91.0 lb
this item is part of these collections...

Related Products